Lexmark MS810DE, 40G0350, 40G0110, 40G0150, 40G0440, 40G0410 Configuring Universal paper settings

Using MS812de 149

Notes:

•The paper size is automatically set according to the position of the paper guides in each tray except the multipurpose feeder.

•The paper size for the multipurpose feeder must be set manually from the Paper Size menu.

•The paper type must be set manually for all trays that do not contain plain paper.

Configuring Universal paper settings

Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus.

Notes:

•The smallest supported Universal size is 70 x 127 mm (2.76 x 5 inches) for one‑sided printing and 105 x 148 mm (4.13 x 5.83 inches) for two‑sided (duplex) printing.

•The largest supported Universal size is 216 x 356 mm (8.5 x 14 inches) for one‑sided and two‑sided printing.

•When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a period of time to ensure the best print performance.

•If you regularly print large jobs on narrow paper, then you may use the MS710 Series printer models, which print batches of 10 or more pages of narrow paper at a faster speed. For more information on the MS710 Series printer models, contact your Lexmark sales representative.

1From the home screen, navigate to:

> Paper Menu > Universal Setup > Units of Measure > select a unit of measure

2Touch Portrait Width or Portrait Height.

3Select the width or height, and then touch Submit.

Loading the 250‑ or 550‑sheet tray

CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed.

1Pull out the tray.

Notes:

•When loading folio‑, legal‑, or Oficio‑size paper, lift the tray slightly and then pull it out completely.

•Do not remove trays while a job prints or while Busy appears on the display. Doing so may cause a jam.