Lexmark 40G0440, 40G0350, 40G0110, 40G0150, 40G0410, 40G0210 manual Understanding the printer menus 237

Understanding the printer menus		237
	Use	To
	Print Recovery	Let the printer successfully print a page that may not have printed
	Page Protect	otherwise.
	Off	Notes:
	On	• Off is the factory default setting. Off prints a partial page
		when there is not enough memory to print the whole page.
		• On sets the printer to process the whole page so that the
		entire page prints.
	Hibernate Timeout on Connection	To set the printer to follow the setting of “Hibernate Timeout” even
	Do Not Hibernate	when an active Ethernet connection exists.
	Hibernate	Notes:
		• If “Hibernate Timeout on Connection” is set to “Do Not
		Hibernate,” then the printer never automatically hibernates.
		• If “Hibernate Timeout on Connection” is set to “Hibernate,”
		then the printer follows the value of the “Hibernate
		Timeout” setting, except when it is set to Disabled.
		• “Do Not Hibernate” is the factory default setting.
	Press Sleep Button	Determine how the printer, while in idle state, reacts to a short
	Do nothing	press of the Sleep button.
	Sleep	Note: Sleep is the factory default setting.
	Hibernate
	Press and Hold Sleep Button	Determine how the printer, while in idle state, reacts when you
	Do nothing	press and hold the Sleep button.
	Sleep	Note: “Do nothing” is the factory default setting.
	Hibernate
	Factory Defaults	Restore the printer settings to the factory default settings.
	Do Not Restore	Notes:
	Restore Now
		• Do Not Restore is the factory default setting. Do Not Restore
		keeps the user‑defined settings.
		• Restore Now returns all printer settings to the factory
		default settings except Network/Ports menu settings. All
		downloads stored in the RAM are deleted. Downloads stored
		in the flash memory or in the printer hard disk are not
		affected.
	Custom Home Message	Select Custom Home Messages on the printer display.
	Off	Note: This menu appears only in non‑touch‑screen printer
	IP Address	models.
	Hostname
	Contact Name
	Location
	Zero Configuration Name
	Custom Text 1