Lexmark MS810DE, 40G0350, 40G0110 Understanding Eco‑Settings, Setting up Remote Operator Panel

Using MS810de 97

1Open a Web browser, and then type the printer IP address in the address field.

Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

2Click Settings > Apps > Apps Management > Forms and Favorites.

3Click Add, and then customize the settings.

Notes:

•See the mouse-over help beside each field for a description of the setting.

•To make sure the location settings of the bookmark are correct, type the correct IP address of the host computer where the bookmark is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 94.

•Make sure the printer has access rights to the folder where the bookmark is located.

4Click Apply.

To use the application, touch Forms and Favorites on the printer home screen, and then navigate through form categories, or search for forms based on a form number, name, or description.

Understanding Eco‑Settings

Icon

Description

The application lets you easily manage energy consumption, noise, toner, and paper usage settings to help reduce the environmental impact of your printer.

Setting up Remote Operator Panel

This application shows the printer control panel on your computer screen and lets you interact with the printer control panel, even when you are not physically near the network printer. From your computer screen, you can view the printer status, release held print jobs, create bookmarks, and do other print-related tasks you might normally do while standing at the network printer.

1Open a Web browser, and then type the printer IP address in the address field.

Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

2Click Settings > Remote Operator Panel Settings.

3Select the Enabled check box, and then customize the settings.

4Click Submit.

To use the application, click Remote Operator Panel > Launch VNC Applet.