Lexmark MS810DN, 40G0350, 40G0110 manual Too many disks installed, Too many flash options installed

Troubleshooting 308

Too many disks installed [58]

1Turn off the printer.

2Unplug the power cord from the electrical outlet.

3Remove the extra printer hard disks.

4Connect the power cord to a properly grounded electrical outlet.

5Turn the printer back on.

Too many flash options installed [58]

1Turn off the printer.

2Unplug the power cord from the electrical outlet.

3Remove the extra flash memory.

4Connect the power cord to a properly grounded electrical outlet.

5Turn the printer back on.

Too many trays attached [58]

1Turn off the printer.

2Unplug the power cord from the electrical outlet.

3Remove the extra trays.

4Connect the power cord to a properly grounded electrical outlet.

5Turn the printer back on.

Tray [x] paper size unsupported

The paper size in the specified tray is unsupported. Replace it with a supported paper size.

Unformatted flash detected [53]

Try one or more of the following:

•From the printer control, select Continue to stop the defragmentation and continue printing. For non‑touch‑screen

printer models, press to confirm.

•Format the flash memory.

Note: If the error message remains, then the flash memory may be defective and need to be replaced.