Lexmark MS810DE, 40G0350, 40G0110, 40G0150 Printing from a flash drive, Adjusting toner darkness

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 71

For Macintosh users

aCustomize the settings in the Page Setup dialog if necessary:

1With a document open, choose File > Page Setup.

2Choose a paper size or create a custom size to match the paper loaded.

3Click OK.

bCustomize the settings in the Page Setup dialog if necessary:

1With a document open, choose File > Print.

If necessary, click the disclosure triangle to see more options.

2From the Print dialog and pop‑up menus adjust the settings if necessary.

Note: To print on a specific paper type, adjust the paper type setting to match the paper loaded, or select the appropriate tray or feeder.

3Click Print.

Adjusting toner darkness

Using the Embedded Web Server

1Open a Web browser, and then type the IP address of the printer in the address field.

Notes:

•View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > Print Settings > Quality Menu > Toner Darkness.

3Adjust the toner darkness, and then click Submit.

Using the printer control panel

1From the printer control panel, navigate to:

> Settings > > Print Settings > > Quality Menu > > Toner Darkness

2Adjust the toner darkness, and then press .

Printing from a flash drive

Supported flash drives and file types

Notes:

•High‑speed USB flash drives must support the full‑speed standard. Low-speed USB devices are not supported.

•USB flash drives must support the File Allocation Table (FAT) system. Devices formatted with New Technology File System (NTFS) or any other file system are not supported.