Lexmark MS810DE manual Understanding the printer menus 227, Manually Set Date and Time, Time Zone

Understanding the printer menus		227
	Use	To
	Manually Set Date and Time	Enter the date and time.
	[input date/time]	Notes:
		• For touch‑screen printer models, date and time are set in YYYY-MM-DD
		HH:MM format.
		• Manually setting the date and time sets Enable NTP to No.
		• For non‑touch‑screen printer models, the wizard lets you set the date and
		time in YYYY‑MM‑DD‑HH:MM format.
	Time Zone	Select the time zone.
	[list of time zones]	Note: GMT is the factory default setting for non‑touch‑screen printer models.
	Automatically observe DST	Set the printer to use the applicable daylight saving time (DST) start and end times
	On	associated with the printer Time Zone setting.
	Off	Note: On is the factory default setting.
	Enable NTP	Enable Network Time Protocol, which synchronizes the clocks of devices on a
	On	network.
	Off	Notes:
		• On is the factory default setting.
		• The setting is turned off if you manually set the date and time.