Patch 86251-08 For Rapier Series Switches

SHOW IP ADVERTISE

61

Commands

This enhancement introduces three new commands:

DISABLE IP ICMPREPLY

ENABLE IP ICMPREPLY

SHOW IP ICMPREPLY

DISABLE IP ICMPREPLY

Syntax DISABLE IP ICMPREPLY[={ALLNETUNREACHHOSTUNREACHREDIRECT}]

Description This command disables ICMP reply messages.

If ALL is specified, all configurable ICMP message replies are disabled. If NETUNREACH is specified, all network unreachable message replies are disabled (RFC792 Type 3 Code 0). If HOSTUNREACH is specified, all host unreachable message replies are disabled (RFC792 Type 3 Code 1). If REDIRECT is specified, all ICMP redirect message replies are disabled (RFC792 Type 5 Code 0, 1, 2, 3).

Example To disable all configurable ICMP messages, use the command:

DISABLE IP ICMPREPLY=ALL

See Also ENABLE IP ICMPREPLY

DISABLE IP ECHOREPLY

SHOW IP ICMPREPLY

ENABLE IP ICMPREPLY

Syntax ENABLE IP ICMPREPLY[={ALLNETUNREACHHOSTUNREACHREDIRECT}]

Description This command enables ICMP reply messages.

If ALL is specified, all configurable ICMP message replies are enabled. If NETUNREACH is specified, all network unreachable message replies are enabled (RFC792 Type 3 Code 0). If HOSTUNREACH is specified, all host unreachable message replies are enabled (RFC792 Type 3 Code 1). If REDIRECT is specified, all ICMP redirect message replies are enabled (RFC792 Type 5 Code 0, 1, 2, 3).

Example To enable all configurable ICMP messages, use the command:

ENABLE IP ICMPREPLY=ALL

See Also ENABLE IP ECHOREPLY

DISABLE IP ICMPREPLY

SHOW IP ICMPREPLY

Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I

Page 61
Image 61
Allied Telesis 86251-08 manual Commands, Disable IP Icmpreply