How to check that the port map is correct | Allied Telesis 86251-08

Patch 86251-08 For Rapier Series Switches

SHOW IP IGMP DEBUG

71

■software release 86s-251 and patch 86251-04 are loaded, but the patch was corrupted after a restart or reboot.

The Rapier16fi requires the 86251-04 patch to operate correctly. Without this patch the port map is incorrect. An incorrect port map will cause problems if the configuration file refers to a port number.

The 2.5.3 software release for Rapier16fi switches will resolve this port map issue.

This section should be read in conjunction with the following document:

■Rapier Switch Documentation Set for Software Release 2.5.1 available on the Documentation and Tools CD-ROM packaged with your switch, or from www.alliedtelesyn.co.nz/documentation/documentation.html.

How to check that the port map is correct

The ifIndex and Interface fields in the SHOW INTERFACE command show the port map settings. ifIndex shows the index of the interface in the interface table, and Interface shows the physical or logical interface that maps to the index entry.

A correct port map

If the 86251-04 patch is successfully installed, and the port map is correct, the output from the SHOW INTERFACE command will be similar to that in Figure 1 on page 71.

Figure 1: Example output from the SHOW INTERFACE command with 86251-04.paz installed

Interfaces		sysUpTime:	00:00:09
DynamicLinkTraps	Disabled
TrapLimit	20
Number of unencrypted	PPP/FR links	0
ifIndex Interface	ifAdminStatus	ifOperStatus	ifLastChange

------------------------------------------------------------------------------

1	port9	Up	Down	00:00:00
2	port10	Up	Down	00:00:00
3	port11	Up	Down	00:00:00
4	port12	Up	Down	00:00:00
5	port13	Up	Down	00:00:00
6	port14	Up	Down	00:00:00
7	port15	Up	Down	00:00:00
8	port16	Up	Down	00:00:00
9	port1	Up	Down	00:00:00
10	port2	Up	Down	00:00:00
11	port3	Up	Down	00:00:00
12	port4	Up	Down	00:00:00
13	port5	Up	Down	00:00:00
14	port6	Up	Down	00:00:00
15	port7	Up	Down	00:00:00
16	port8	Up	Down	00:00:00
17	vlan1	Up	Down	00:00:00

------------------------------------------------------------------------------

Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I

Image 71

Allied Telesis 86251-08 manual How to check that the port map is correct

Contents

Introduction Patch For Rapier Series Switches PCR Module BGP Level FeaturesPCR Module IPG Level PCR 03359 Module Core Level PCR Module FIRE, Utility Level PCR 03684 Module Core LevelPCR Module TTY, User Level PCR Module STP Level PCR Module Firewall Level PCR Module Isakmp LevelPCR Module Ipsec Level PCR Module SW56 Level PCR Module Utility Level PCR Module SWI LevelPCR Module IGP Level PCR 31001 Module Dhcp Level PCR Module BGP Level PCR 31098 Module Dhcp Level PCR 31081 Module VRRP, IP, TCP, TelnetPCR Module File Level PCR Module FFS Level PCR Module IPG PCR 31106 Module MLD LevelPCR Module IPX2 Level PCR 02414 Module IPV6, SWI, IPG, Vlan PCR 03751 Module Mlds Level PCR Module OSPF, IPG LevelPCR Module ETH, IPG, IPv6, IPX Level PCR 03801 Module Mlds Level PCR Module FILE, INSTALL, SCR LevelPCR Module Install Level PCR Module ETH Level PCR 03843 Module Dhcp Level PCR 03823 Module Vlan Level PCR Module TTY Level PCR Module IPG, IPV6 LevelPCR 03870 Module SWI, Vlan Level PCR Module DHCP, Telnet Level PCR Module Ikmp Level PCR Module Switch LevelPCR Module IP ARP Level PCR Module Firewall Network affecting No PCR Module L2TP Level PCR Module Ospf Network affecting No PCR 03515 Module Dhcp Level PCR Module PRI LevelPCR Module PPP Level PCR 03547 Module Dhcp Level PCR Module BGP, TCP LevelPCR Module HTTP, Firewall Level PCR Module Http Level PCR Module Ping Level PCR Module FIREWALL, IPG LevelPCR 03584 Module MLD Level PCR Module STP, SWI Level PCR 03615 Module Load LevelPCR 03618 Module Dhcp Level PCR 03647 Module Snmp Level PCR 03708 Module Dhcp Level PCR Module PKI LevelPCR 03691 Module Dvmrp Level PCR 03698 Module Dvmrp Level PCR Module IP Level PCR Module PPP, VJC Level PCR Module Rsvp Level PCR Module Vrrp Level Features PCR Module SSL Level PCR 03371 Module Dhcp LevelPCR Module IPSEC, Ikmp Level PCR 03429 Module SWI, Vlan Level PCR 03405 Module Stream LevelPCR 03410 Module VLAN, Core Level PCR 03424 Module Dhcp Level PCR Module FR Level PCR 03436 Module IP, Dhcp LevelPCR Module IPX Level PCR 03443 Module Dhcp Level PCR 03465 Module Dhcp Level PCR Module BGP, Firewall Level PCR 03492 Module HTTP, Load Level PCR 03515 Module Dhcp Level PCR 03094 Module STP, Vlan Level PCR 02577 Module IPG, LOG LevelPCR Module GUI Level PCR 03089 Module Core Level PCR Module Classifier Level PCR 03096 Module Vlan LevelPCR Module PIM, DVMRP, IPG Level PCR 03109 Module LOG Level PCR Module Port Level PCR Module ETH, IPG LevelPCR Module IPG, SWI Level PCR Module Cure Level PCR 03167 Module Dvmrp Level PCR 03153 Module ACC LevelPCR Module PCI Level PCR Module User Level PCR Module CORE, FFS, TTY LevelPCR Module FIREWALL, LB Level PCR Module LB Level PCR 03229 Module Load Level PCR 03205 Module Dhcp Level PCR 03247 Module MVR Level PCR 03239 Module QOS LevelPCR Module SWI, IPG, PIM Level PCR Module VLAN, IPG Level PCR 03256 Module MLD Level PCR Module DHCP, Q931, Telnet Level PCR Module IP, SWI Level PCR 03334 Module MVR LevelPCR 03336 Module Core Level PCR 03346 Module Snmp Level Vlan PCR 03370 Module MVR Level PCR 03388 Module Dhcp Level ADD PPP Create PPP Delete PPP SET PPP Show PPP PCR Module IPV6 Network affecting No PCR 03067 Module Dhcp LevelPCR 03068 Module SWI, QOS Level PCR 03077 Module Core Level PCR Module IPG, ETH Network affecting No PCR Module SWI Network affecting NoPCR Module IPG Network affecting No PCR Module PCI Network affecting No PCR Module TM Network affecting No Availability Icmp Router Discovery AdvertisementsPCR Module TELNET, PING, IPV6, Network affecting No PCR Module TCP Network affecting No Router Advertisement Messages To change these settings, use one of the commands ADD IP Interface SET IP Interface ADD IP Advertise Interface Enable IP AdvertiseDisable IP Advertise Delete IP Advertise Interface SET IP Advertise Interface Show IP Advertise Example output from the Show IP Advertise command Same subnet Adopting the Vrrp IP Address MLD Snooping Ping Polling of Device Reachability Down device unreachable Icmp Redirect Enable and Disable Icmp Messages Disable IP Icmpreply Commands Show IP Icmpreply Static Igmp Configuration Example Show IP Igmp Commands See Also Show IP Igmp Debug ADD IP Igmp Destination Create IP Igmp Destination Destroy IP Igmp Destination Delete IP Igmp Destination Enable IP Igmp Debug Disable IP Igmp Debug Show IP Igmp Debug Checking the Port Map on Rapier16fi Switches How to check that the port map is correct How to restore the correct port map Force Eprom download Y ? PPPoE Client on Vlan Interfaces ADD PPP Create PPP SET PPP Delete PPP Show PPP VLANn-servicename, TNL- callname Show PPP