Allied Telesis 86251-08 manual PCR Module Http Level

18 Patch Release Note

PCR: 03551 Module: IPV6 Level: 2

The command ADD IPV6 6TO4 IP did not allow more than one tunnel. This issue has been resolved. This command can now be used repeatedly to create multiple tunnels.

PCR: 03554 Module: FIREWALL Level: 3

When a dynamic public firewall interface was UP it was not possible to delete any (non-dynamic) public interface rules. Also, under the same circumstances it was possible to create duplicates of public interface rules (with the same rule ID number). These issues have been resolved.

PCR: 03555 Module: HTTP Level: 3

The RESET HTTP SERVER command was resetting the dynamic configuration settings back to the default values. This command now resets the HTTP server counters, and restarts the HTTP server using the dynamic configuration settings.

PCR: 03558 Module: PIM, PIM6 Level: 2

Periodic PIM (*,*,RP) Join messages did not cease after a set Rendezvous

Point timed out. This issue has been resolved.

PCR: 03560 Module: IPV6 Level: 2

A fatal error sometimes occurred when IPv6 multicast packets were forwarded via an interface that went down and then came back up. This issue has been resolved.

PCR: 03562 Module: IPV6 Level: 3

Disabling and then enabling IPv6 made the CREATE IPV6

INTERFACE=VLAN command appear twice in the configuration script.

This issue has been resolved.

PCR: 03564 Module: IPV6 Level: 2

A fatal error sometimes occurred when an IPv6 flow used a virtual interface, and the flow was displayed using the SHOW IPV6 FLOW command. This issue has been resolved.

PCR: 03565 Module: BGP Level: 2

A fatal error occurred after executing the SET BGP PEER command when a BGP session was established with more than 15 communities defined. This issue has been resolved.

PCR: 03566 Module: OSPF Level: 2

An area border router did not send summary LSA messages via a PPP link when the area changed. This issue has been resolved.

PCR: 03568 Module: IPV6 Level: 3

IPv6 filters were not handling ICMPv6 packets correctly. This issue has been resolved.

Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I