Allied Telesis 86251-08 manual Create PPP

Models: 86251-08

1 78
Download 78 pages 42.81 Kb
Page 75
Image 75

Patch 86251-08 For Rapier Series Switches

CREATE PPP

75

CREATE PPP

Syntax CREATE PPP=ppp-interface OVER=physical-interface

[other parameters]

where:

ppp-interfaceis the PPP interface number, from 0 to 511.

physical-interface is:

SYNn

DS3n

ISDN-callname

ACC-callname

MIOXn-circuitname

TDM-groupname

TNL-callname(L2TP tunnel)

VLANn-servicename

Description This command creates the specified PPP interface running over:

a synchronous port

a DS3 port

an ISDN call

an ACC call

a MIOX circuit

TDM group

an L2TP call

a PPP over Ethernet service

a PPP over Ethernet service over a VLAN interface

For PPP over Ethernet and PPP over VLAN links, use the service name provided by your ISP, or the special service name ANY to specify that any service is acceptable.

The OVER parameter specifies the physical interface over which the PPP interface will run. Additional physical interfaces can be added to the PPP interface using the ADD PPP command.

Examples To create PPP interface 0 CREATE PPP=0 OVER=vlan2-access

Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I

Page 75
Image 75
Allied Telesis 86251-08 manual Create PPP