Patch 86251-08 For Rapier Series Switches

SHOW PPP

77

Description This command is used to change the configuration parameters of a PPP interface running over:

a synchronous port

a DS3 port

an ISDN call

an ACC call

a MIOX circuit

TDM group

an L2TP call PPP over Ethernet service

a PPP over Ethernet service over a VLAN interface

For PPP over Ethernet and PPP over VLAN links, use the service name provided by your ISP, or the special service name ANY to specify that any service is acceptable.

SHOW PPP

Syntax SHOW PPP[=ppp-interface]

where:

ppp-interfaceis the PPP interface number, from 0 to 511.

Description This command displays a list of each PPP interface, users of the interface, physical interfaces that the interface is running over, and the current state of the interface.

There have not been any changes to the descriptive text or SHOW output in this command. The only change is in the Table. Table 1 shows the row which has changed, with the changed text in bold.

Table 3: Parameters displayed in the output of the SHOW PPP command (showing the changed row only).

Parameter

Meaning

 

 

Over

The lower layer(s) used by the PPP interface; SYNn, DS3n,

 

ISDN-callname,ACC-callname,MIOXn-circuitname,TDM-groupname,

 

VLANn-servicename, TNL-callname.

 

 

Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I

Page 77
Image 77
Allied Telesis 86251-08 manual Show PPP, VLANn-servicename, TNL- callname