76

DELETE PPP

Patch Release Note

DELETE PPP

Syntax DELETE PPP=ppp-interface OVER=physical-interface

[other parameters]

where:

ppp-interfaceis the PPP interface number, from 0 to 511.

physical-interface is:

SYNn

DS3n

ISDN-callname

ACC-callname

MIOXn-circuitname

TDM-groupname

TNL-callname

VLANn-servicename

Description This command deletes the specified lower layer interface from an existing PPP multilink bundle. The interface may be left with no lower layer interfaces.

The OVER parameter specifies the interface to be deleted.

Examples To delete the PPPoE service “ANY” on vlan2 as a physical interface from PPP interface 1, use the command:

DELETE PPP=1 OVER=vlan2-any

SET PPP

Syntax SET PPP=ppp-interface [OVER=physical-interface]

[other parameters]

where:

ppp-interfaceis the PPP interface number, from 0 to 511.

physical-interface is:

SYNn

DS3n

ISDN-callname

ACC-callname

MIOXn-circuitname

TDM-groupname

TNL-callname

VLANn-servicename

Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I

Page 76
Image 76
Allied Telesis 86251-08 manual Delete PPP, Set Ppp