Patch 86251-08 For Rapier Series Switches

45

PCR: 03065

Module: SWI

Level: 2

When the TX cable was unplugged from a fibre port the operating status was incorrectly reported as UP. This issue has been resolved.

PCR: 03067 Module: DHCP

Level: 1

When replying to a DHCP REQUEST that had passed through a DHCP relay, the broadcast bit of DHCP NAK messages was not being set. This issue has been resolved in accordance with RFC2131.

PCR: 03068 Module: SWI, QOS

Level: 2

The SET QOS HWPRIORITY and SET QOS HWQUEUE commands were not accepting all parameters correctly. This meant that the HWPRIORITY and HWQUEUE commands could not be modified with the associated SET command, but had to be made in the configuration script. This issue has been resolved.

PCR: 03069

Module: SWI

Level: 1

An issue with Secure Shell clients not being able to connect to a Secure Shell server unless 3DES was installed on both the client and the server has been resolved.

PCR: 03077 Module: CORE

Level: 4

The fault LED incorrectly reported a power supply fault (three flashes) on the 48V DC switch versions. This issue has been resolved.

Features in 86251-02

Patch file details are listed in Table 7.

Table 7: Patch file details for Patch 86251-02.

Base Software Release File

86s-251.rez

 

 

Patch Release Date

29-January-2003

 

 

Compressed Patch File Name

86251-02.paz

 

 

Compressed Patch File Size

28756 bytes

 

 

PCR: 02542

Module: IPV6

Network affecting: No

The SHOW IPV6 commands were incorrectly including RIPng down routes, and routes on the sending interface. The IPv6 routing table now recognises down routes.

PCR: 02574 Module: DVMRP

Network affecting: No

Some change actions, and the resending of prune messages were not operating correctly. This issue has been resolved.

Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I

Page 45
Image 45
Allied Telesis 86251-08 manual PCR 03067 Module Dhcp Level, PCR 03068 Module SWI, QOS Level, PCR 03077 Module Core Level