Allied Telesis 86251-08 manual PCR 03153 Module ACC Level, PCR Module PCI Level

Patch 86251-08 For Rapier Series Switches 35

PCR: 03152 Module: IPG Level: 3

An additional check has been added to validate the MASK specified in an

ADD IP ROUTE command. The check tests that the mask is contiguous.

PCR: 03153 Module: ACC Level: 4

The SHOW CONFIG=ACC command was not showing the rscript file. This issue has been resolved.

PCR: 03154 Module: PCI Level: 4

The SHOW IP MVR command output was showing dynamic members in the incorrect column. This issue has been resolved.

PCR: 03155 Module: FFS Level: 4

The SHOW FFILE command output has changed. The first column that listed where the file was stored has been removed. The title of the original second column (now the first column) has been changed from “creator” to “module”. The file format specifier has been altered from:

DDDD:MMMM\NNNNNNNN.TTT

to:

MMMM\NNNNNNNN.TTT

PCR: 03157 Module: IPV6 Level: 3

When changing the ACTION parameter between INCLUDE and EXCLUDE on IPV6 filters the interface information was not preserved between changes. The interface information is now preserved.

PCR: 03159 Module: SWI Level: 2

Switch trunk speed checks only checked for gigabit settings, not speed capabilities. It is now possible for uplink modules which support 10, 000 and gigabit speed to attach to trunks where speeds are 10Mb/s or 100Mb/s.

PCR: 03162 Module: IPV6 Level: 3

The performance of IPv6 has been improved by introducing IPv6 flows.

PCR: 03163 Module: IPG Level: 3

IGMP Snooping did not use DVMRP messages to identify a port. This issue has been resolved.

PCR: 03166 Module: IPG Level: 4

The output of the SHOW IP IGMP COUNTER and SHOW IGMPSNOOPING COUNTER commands was incorrect. This issue has been resolved.

PCR: 03167 Module: DVMRP Level: 2

When multicasting to a VLAN interface, if more than 2 DVMRP neighbours existed on a single port, and any one of those neighbours was pruned, the multicast data would stop flowing to the port. This happened even though it was still required for the remaining DVMRP neighbours. This issue has been resolved.

Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I