Patch 86251-08 For Rapier Series Switches

11

PCR: 03809

Module: SWI

Level: 2

An additional check has been added for unknown GBIC models to

 

determine if they are copper or fibre.

 

PCR: 03817

Module: IPV6

Level: 2

A fatal error occurred when IPv6 fragmented a packet. Also, when a large fragmented ICMP echo request packet was received, the reply may not have been fragmented and so may have exceeded the MTU for the interface it was sent on. These issues have been resolved.

PCR: 03823 Module: VLAN

Level: 2

If the last port in a VLAN went down, that port was not automatically deleted from IGMP groups. This issue has been resolved.

PCR: 03825

Module: IPG

Level: 2

The incorrect logical interface was selected for broadcast packets received with a subnet mask that differed from the class mask. This issue has been resolved.

PCR: 03826

Module: BGP

Level: 2

When BGP imported routes from IP with the ADD BGP IMPORT command, and there were multiple import choices, the best IP route was not always imported. This issue has been resolved.

PCR: 03828

Module: IPV6

Level: 2

The MTU value for IPv6 PPP interfaces was always set to 1280 bytes. This

MTU value is now correctly set to 1500 bytes, and 1492 bytes for PPP over

Ethernet (PPPoE).

PCR: 03836

Module: OSPF

Level: 2

OSPF sometimes chose routes with an infinite metric over routes with a finite metric when selecting the best local route. This issue has been resolved.

PCR: 03839

Module: IPV6

Level: 2

A fatal error sometimes occurred when an IPv6 ping packet length

 

exceeded 1453 bytes. This issue has been resolved.

 

PCR: 03841

Module: IPG

Level: 2

A fatal error occurred when the PIM path was recovering. This issue has been resolved.

PCR: 03843 Module: DHCP

Level: 2

When some DHCP entries were in Reclaim mode, and all interface links related to the range of these entries went down, these DHCP entries were stuck in Reclaim mode. This issue has been resolved.

PCR: 03850

Module: FFS

Level: 3

Files were not displayed in the SHOW FFILE command output, after entering “Q” at the CLI to quit from a previous prompt. This issue has been resolved.

Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I

Page 11
Image 11
Allied Telesis 86251-08 manual PCR 03823 Module Vlan Level, PCR 03843 Module Dhcp Level