54 SHOW IP ADVERTISE Patch Release Note
Patch 86251-08 for Software Release 2.5.1
C613-10356-00 REV I
See Also DISABLE IP DISCOVERY
DELETE IP DISCOVERY INTERFACE
ENABLE IP DISCOVERY
ADD IP DISCOVERY INTERFACE
SHOW IP ADVERTISESyntax SHOW IP ADVERTISE
Description This command displays the Router Discovery advertising configuration for all
IP interfaces.
Figure 2: Example output from the SHOW IP ADVERTISE command.
Router Advertisement ................ Enabled
Interface ........................... vlan2
Advertisement Address ........... 224.0.0.1 (all)
Max Advertisement Interval ...... 600
Min Advertisement Interval ...... 450
Lifetime ........................ 1800
Advertisements sent ............. 1
Solicitations received .......... 0
Logical Interface IP Address Advertise Preference Level
----------------------------------------------------------------
vlan2-0 192.168.1.1 Yes -1
vlan2-1 192.168.2.1 Yes 1
Table 10: Parameters displayed in the output of the SHOW IP ADVERTISE
command.
Parameter Meaning
Router Advertisement Whether the ICMP Router Discovery advertisements
feature is enabled or disabled on the router.
Interface The IP physical interface.
Advertisement Address Either the All-systems multicast address (224.0.0.1)
or the Limited-broadcast address (255.255.255.255).
Max Advertisement Interval The maximum time allowed between sending
multicast router advertisements.
Min Advertisement Interval The minimum time allowed between sending
multicast router advertisements.
Lifetime The maximum time that the advertised address
should be treated as valid.
Advertisements sent How many router advertisements the interface has
sent since advertising was enabled.
Solicitations received How many router solicitations the interface has
received since advertising was enabled.
Logical Interface An IP logical in terface on this physical interface.