Lexmark MS810DTN, 40G0350, 40G0110, 40G0150 Installing internal options, Available internal options

Additional printer setup 12

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and then unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Available internal options

•Memory card

–DDR3 DIMM

–Flash memory

•Fonts

•Firmware cards

–Forms and Bar Code

–PRESCRIBE

–IPDS

•Printer hard disk

•LexmarkTM Internal Solutions Ports (ISP)

–Parallel 1284-B interface

–MarkNetTM N8350 802.11 b/g/n wireless printer server

–RS-232-C serial interface

Accessing the controller board

Note: This task requires a flat‑head screwdriver.

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1Remove the controller board access cover.

1

2