Lexmark 40G0350 Understanding the printer menus 234, Contact Name, Location, Alarms, Timeouts

Understanding the printer menus		234
	Use	To
	Contact Name	Specify a contact name for the printer.
		Notes:
		• This menu appears only in touch‑screen printer models.
		• The contact name will be stored on the Embedded Web
		Server.
	Location	Specify the location of the printer.
		Notes:
		• This menu appears only in touch‑screen printer models.
		• The location will be stored on the Embedded Web Server.
	Alarms	Set an alarm to sound when the printer requires user intervention.
	Alarm Control	For each alarm type, select from the following options:
	Cartridge Alarm	Off
	Staple Alarm	Single
	Hole Punch Alarm	Continuous
		Notes:
		• Single is the factory default setting for Alarm Control. Single
		sounds three quick beeps.
		• Off is the factory default setting for Cartridge Alarm, Staple
		Alarm, and Hole Punch Alarm. Off means no alarm will
		sound.
		• Continuous repeats three beeps every 10 seconds.
	Timeouts	Specify the number of minutes of inactivity before the printer
	Standby Mode	enters a lower power state.
	Disabled	Notes:
	1–240	• Standby Mode appears only in touch‑screen printer models.
		• 15 is the factory default setting.
	Timeouts	Set the amount of time the printer waits after a job is printed before
	Sleep Mode	it goes into a reduced power state.
	Disabled	Notes:
	1–120	• 30 is the factory default setting.
		• Disabled appears only when Energy Conserve is set to Off.
		• Lower settings conserve more energy, but may require
		longer warm‑up times.
		• Select a high setting if the printer is in constant use. Under
		most circumstances, this keeps the printer ready to print
		with minimum warm‑up time.