Lexmark MS811DTN Understanding the printer menus 241, Print Area, Download Target, Resource Save

Understanding the printer menus 241

Use

Print Area

Normal

Fit to Page

Whole Page

Download Target

RAM

Flash

Disk

Resource Save

On

Off

Print All Order

Alphabetical

Oldest First

Newest First

To

Set the logical and physical printable area.

Notes:

•Normal is the factory default setting. When attempting to print data in the non‑printable area defined by the Normal setting, the printer clips the image at the boundary.

•Fit to Page fits the page content into the selected paper size.

•Whole Page allows the image to be moved into the

non‑printable area defined by the Normal setting, but the printer clips the image at the Normal setting boundary. This setting affects only pages printed using a PCL 5e interpreter and has no effect on pages printed using the PCL XL or PostScript interpreter.

Set the storage location for downloads.

Notes:

•RAM is the factory default setting. Storing downloads in the RAM is temporary.

•Storing downloads in a flash memory or in a printer hard disk places them in permanent storage. Downloads remain in the flash memory or printer hard disk even when the printer is turned off.

•This menu item appears only if an optional flash memory or printer hard disk is installed.

Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a print job that requires more than the available memory.

Notes:

•Off is the factory default setting. Off sets the printer to retain downloads only until memory is needed. Downloads are deleted in order to process print jobs.

•On sets the printer to retain downloads during language changes and printer resets. If the printer runs out of memory, then Memory Full [38] appears on the printer display, but downloads are not deleted.

Specify the order in which held and confidential jobs are printed when Print All is selected.

Notes:

•This menu appears only in touch‑screen printer models.

•Alphabetical is the factory default setting.