Lexmark MS811DN Serial port x disabled, Some held jobs were not restored, Too many bins attached

Troubleshooting 307

Serial port [x] disabled [56]

Try one or more of the following:

•Select Continue to clear the message. For non-touch-screen printer models, press to confirm. The printer discards any data received through the specified serial port.

•Select Reset active bin to reset the active bin for a linked set of bins.

•Make sure the Serial Buffer menu is set to Enabled.

Some held jobs were not restored

Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm. Note: Held jobs that are not restored remain in the printer hard disk and are inaccessible.

Standard network software error [54]

Try one or more of the following:

•From the printer control panel, select Continue to continue printing. For non‑touch‑screen printer models, press

to confirm.

•Turn off the printer and then turn it back on.

•Update the network firmware in the printer or print server. For more information, contact customer support.

Standard USB port disabled [56]

From the printer control panel, select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

Notes:

•The printer discards any data received through the USB port.

•Make sure the USB Buffer menu is not set to Disabled.

Supply needed to complete job

A supply needed to complete the job is missing. Cancel the current job.

Too many bins attached [58]

1Turn off the printer.

2Unplug the power cord from the electrical outlet.

3Remove the extra bins.

4Connect the power cord to a properly grounded electrical outlet.

5Turn the printer back on.