Lexmark MS811DN, 40G0350, 40G0110, 40G0150, 40G0440, 40G0410, 40G0210, MS810DE, MS811DTN, MS810DN, MS812DE

Maintaining the printer 268

–To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher.

•If the printer does not have a caster base but is configured with optional trays, then remove the trays.

Note: Slide the latch on the right side of the optional tray toward the front of the tray until it clicks into place.

•Use the handholds located on both sides of the printer to lift it.

•Make sure your fingers are not under the printer when you set it down.