Lexmark 40G0410, 40G0350 Using Hibernate mode, Adjusting the brightness of the printer display

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 82

Using Hibernate mode

Hibernate is an ultra‑low‑power operating mode. When operating in Hibernate mode, all other systems and devices are powered down safely.

Notes:

•Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode.

•If the printer is in Hibernate mode, then the Embedded Web Server is disabled.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If your are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > General Settings > Sleep Button Settings.

3From the “Press Sleep Button” or “Press and Hold Sleep Button” drop‑down menu, select Hibernate.

4Click Submit.

Using the printer control panel

1From the printer control panel, navigate to:

> Settings > > Settings > > General Settings >

2Press the arrow buttons until Press Sleep Button or Press and Hold Sleep Button appears, and

then press .

3Press the arrow buttons until Hibernate appears, and then press .

Notes:

•When Press Sleep Button is set to Hibernate, a short press of the Sleep button sets the printer to Hibernate mode.

•When Press and Hold Sleep Button is set to Hibernate, a long press of the Sleep button sets the printer to Hibernate mode.

Adjusting the brightness of the printer display

To save energy, or if you have trouble reading the display, adjust its brightness settings.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.