1 | 3OPEN |
|
ksJswVLswNM
1 x3lmbkz VM
≥
≥
≥
≥
≥
≥
VVKVVMKMN
1
ENGLISH
Using the LCD Monitor
(NV-VZ9/VZ10 only)
Improved LCD backlight transmission makes the picture extra bright. In addition, special coating of the LCD’s surface diffuses the light from outside to minimize light reflection, so the picture has vivid colours and is easy to see.
1 Slide the [3OPEN] Lever to the left and simultaneously open the LCD Monitor in the direction of the arrow approximately 90x.
Closing the LCD Monitor
Turn the LCD Monitor back toward the Movie Camera body until it locks with a click.
≥The picture seen on the LCD Monitor looks slightly stretched vertically, however, the actually recorded picture remains unaffected by this.
≥Return the LCD Monitor to its vertical position before closing it. Also, make sure that the Cassette Compartment is securely closed before closing the LCD Monitor.
≥Opening the LCD Monitor automatically turns the Finder off. However, when you turn the LCD Monitor so that is faces forward, the Finder turns on again.
≥When the Movie Camera is very cold when turning it on, the picture on the LCD Monitor is darker than normally. However, as it reaches normal temperature, it regains its normal brightness.
≥To remove fingerprints, wipe the LCD Monitor with a soft cloth.
≥Do not expose the LCD Monitor to direct sunlight. When sunlight falls onto the LCD Monitor, it may be difficult to view the picture.
Extremely high precision technology is employed to produce the LCD Monitor. The result is more than 99.99% active pixels with a mere 0.01% of the pixels inactive or always lit. However, this is not a malfunction and does not affect the recorded picture.
