Connecting the VCR to a Satellite Receiver or Digital Receiver

Satellite receiver here includes a digital receiver.

The connection method differs depending on the type of your satellite receiver.

For details about the connection, also read the satellite receiver’s operating instructions.

If the Satellite Receiver is Equipped with a 21-pin Scart Socket

If your satellite receiver is equipped with a 21-pin Scart socket, use a 21-pin Scart cable to connect the VCR.

For the connection to the TV, refer to pages 8 and 10.

Be sure to keep the VCR, TV and satellite receiver switched off until you have finished all connections.

For your safety, do not connect or handle the equipment with wet hands.

b

Satellite receiver (not supplied)

 

 

1

2

21-pin Scart socket

 

To an AC Mains socket

21-pin Scart cable

¡If your satellite

 

 

(not supplied)

 

receiver has a VCR

 

 

 

socket, connect the

 

 

cable to it.

 

1Connect a 21-pin Scart cable (not supplied) to the AV2 21-pin Scart socket b on the VCR and to the 21-pin Scart socket on the satellite receiver.

2Connect the satellite receiver’s mains lead to an AC mains socket.

3Set “AV2” to “TIMER” or “EXT”. For details, see page 30.

If the Satellite Receiver Is Not Equipped with a 21-Pin Scart Socket

In case your satellite receiver is not equipped with a 21-pin Scart socket, use the RF coaxial cable to connect it to the VCR.

For the connection to the TV, refer to pages 8 and 10.

Be sure to keep the VCR, TV and satellite receiver switched off until you have finished all connections.

For your safety, do not connect or handle the equipment with wet hands.

 

Aerial (not supplied)

Satellite receiver

Aerial Input socket

(not supplied)

Aerial lead

 

(not supplied)

 

1

3

Aerial Output

socket

To an AC mains socket

2

cRF coaxial cable (not supplied)

1Connect the aerial lead to the Aerial Input socket on the satellite receiver.

2Connect the RF coaxial cable to the Aerial Output socket on the satellite receiver and to the Aerial Input socket c on the VCR.

3Connect the satellite receiver’s mains lead to an AC mains socket.

Hint:

¡ The RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the VCR,

e.g. re-adjust to channel 33. OperationsAdvanced

23

Page 23
Image 23
Panasonic NV-SJ260 operating instructions Satellite receiver not supplied Pin Scart socket