Cancelling the 0 Lux Night View Function

Set the [0 LUX OFF/ON] Switch to [OFF] to make the [0LUX] Indication disappear.

OLUX OFF

ON

Cancelling the Super Image Stabilizer Function

Press the [SIS] Button again.

SIS

In the Following Recording Conditions, the Picture Stabilizing Effect May Not Be

Sufficient:

Subjects with horizontal or vertical stripes Flat subjects

Dark subjects (In this case, the [[] Indication flashes. Increase the amount of light.)

Subject under many fluorescent lamps.

Remarks, etc.

Notes for Recording in Dark Places without Any Illumination

Do not use the 0 Lux Night View Function in brightly lit places and never aim the Movie Camera against the sun, as this could cause irreparable damage. The playback picture of scenes recorded with the 0 Lux Night View Function will be in black and white.

If you change the setting of the [0 LUX OFF/ON] Switch during recording, a switching noise is also recorded.

When recording in the 0 Lux Night View Function, it is not possible to adjust the white balance manually or to cancel the manually adjusted white balance setting.

It is not possible to use any of the Programme AE Modes when the 0 Lux Night View Mode is activated.

When using the 0 Lux Night View Function, the subject should be within 3 metres from the Movie Camera.

When the automatic focusing is not precise, adjust the focus manually.

As the iris is fully opened in the 0 Lux Night View Mode, subjects in white or other light colours may be recorded whitish, blurred and with weak contrast.

If you use the 0 Lux Night View Function together with the Motion-Sensor-Controlled Recording Function, recording starts automatically when the Movie Camera’s built-in Motion Sensor detects some movement in the picture. This combined function is convenient for easy, unattended animal observation recordings at night.

Advanced Operations

43

Page 43
Image 43
Panasonic NV RZ 15 B Cancelling the 0 Lux Night View Function, Cancelling the Super Image Stabilizer Function