32 - ENGLISH
Settings
PICTURE menuDepending on the projection environment, you can use
these preset parameter settings to optimise image
projection. Press I H to cycle through the options.
You can adjust the contrast of the projected image.
Adjust the BRIGHTNESS in advance if necessary.
Setting range: -64 to +64
You can adjust the brightness of the projected image.
Setting range: -32 to +32
You can adjust the color saturation of the projected
image.
Setting range: -32 to +32
When COMPUTER signal is connected, only available
with the following signals.
1 125 (1 080)/60i 1 125 (1 080)/50i
1 125 (1 080)/60p 1 125 (1 080)/50p
You can adjust the skin tone in the projected image.
Setting range: -32 to +32
When COMPUTER signal is connected, only available
with the following signals.
1 125 (1 080)/60i 1 125 (1 080)/50i
1 125 (1 080)/60p 1 125 (1 080)/50p
You can adjust the sharpness of the projected image.
Setting range will vary according to the selected input
signal.
PICTURE MODE
NORMAL CINEMA3
DYNAMIC
CINEMA2
COLOR1
COLOR2 CINEMA1
NORMAL Setting for a general image, such
as sports programme or TV
games
DYNAMIC Bright and sharp setting
COLOR1
Setting for HDTV standard in ITU-
R BT. 709 and color temperature
6 500 K at the default setting of
the PICTURE menu items.
COLOR2
Setting for DCDM standard
(SMPTE431-2) and color
temperature 6 300 K at the
default setting of the PICTURE
menu items.
CINEMA1 Setting tuned by top Hollywood
colorists
CINEMA2 Deeper and more rich color
setting
CINEMA3 Vivid and crisp color setting
NOTE:
• It may take for a while until the selected mode is
stabilised.
Remote control Control panel
See “Navigating through the MENU” on page 29.
See “Main menu and sub-menu” on page 30.