POSITION menu
WSS
WSS (Wide Screen Signalling) detects if a PAL/
625p (576p)/625i (576i) signal is input and that signal has an identification signal, and switch the aspect ratio to required setting automatically. You can switch the system off manually.
OVER SCAN
If the 4 edges of an image is partly dropped, you can use this function to adjust and project it properly.
Setting range: 0 to +10
OVER SCAN is not available with COMPUTER signals.
KEYSTONE
If the projector is aligned
Image | Operation |
|
|
|
|
|
|
Shrink | Enlarge | Setting range: |
NOTE:
•You can correct the distortion ± 30 degrees from the vertical plane. For a better quality image, installing the projector with minimum distortion is recommended.
•Some distortion may be retained for the lens shift adjustment.
•The distortion of the main menu screen is not correctable.
•The result of the keystone correction will affect the aspect ratio and the size of the image.
AUTO SETUP
You can adjust V - POSITION, H - POSITION, DOT CLOCK and CLOCK PHASE automatically when connecting via COMPUTER IN. Press ENTER to adjust these at the same time.
