PICTURE menu
ENGLISH - 31
Settings
You can adjust the white balance of the projected image.
Setting range: -6 to +6
You can switch automatic adjustment system of the lamp
and the lens iris, which conrol the contrast and black
level, on/off.
ON: Automatic adjustment
OFF: No adjustment
The luminance sensor detects the brightness of the
room and keeps the luminance in balance automatically.
If needed, you can switch this function on/off from
MODE, or adjust it manually from MANUAL by pressing
I H.
Setting range: -8 to +8
You can perform more detailed image adjustment
manually.

JGAMMA

You can adjust linear intensity at 3 levels. Press I
H to increase/decrease 1 point.
Setting range: -8 to +8

JCONTRAST

You can adjust the amount of contrast in RGB
colours individually. Press I H to increase/
decrease 1 point.
Setting range: -16 to +16

JBRIGHTNESS

You can adjust the brightness in RGB colours
individually. Press I H to increase/decrease
1 point.
Setting range: -16 to +16

JCOLOUR MANAGEMENT

You can manage your own defined colour settings.
See “Setting your own colour profile” on page 24.

JNR (Noise Reduction)

You can switch the automatic noise reduction
system on/off. Press I H to select the required
setting.
ON: Automatic noise reduction
OFF: No noise reduction

JMPEG NR

You can switch the automatic noise reduction
system for MPEG format images on/off. The
system minimise block noise and mosquito noise
to eliminate jagged edges, providing an overall
smoother image. Press I H to select the required
setting.
ON: Active
OFF: Deactive

JCINEMA REALITY

You can switch the automatic image synchroniser
on/off for 24 frames a second images, such as
movies. Press I H to select the required setting.
ON: Active
OFF: Deactive
COLOUR TEMPERATUREDYNAMIC IRISLIGHT HARMONIZER
NOTE:
• To assure correct performance of the LIGHT
HARMONIZER, do not interrupt the light on to the
luminance sensor. See “Projector body” on page 12.
ADVANCED MENU
Levels Default setting
GAMMA HIGH 0
GAMMA MID 0
GAMMA LOW 0
RGB Default setting
CONTRAST R 0
CONTRAST G 0
CONTRAST B 0

Less

reddish

Less

bluish

RGB Default setting
BRIGHTNESS R 0
BRIGHTNESS G 0
BRIGHTNESS B 0
NOTE:
•MPEG NR system is not available with COMPUTER/
HDMI (VGA480) signals.
NOTE:
•CINEMA REALITY is effective only with interlace
signals.
http://www.pureglare.com.au