Getting Started
18 - ENGLISH
Connections

Read and follow the operating and connecting instructions of each peripheral device.

The peripheral devices must be turned off.

Use cables that match each peripheral device to be connected.

Confirm the type of video signals. See “List of compatible signals” on page 45.

Audio cables must be connected from each peripheral device directly to the audio reproduction system.

\

Before connecting to the projector

Connecting to COMPONENT IN/VIDEO IN/S-VIDEO IN

Connecting to COMPUTER IN/HDMI IN

NOTE:
• Make sure the HDMI cable is adapted to your HDMI device for proper performance.
• A compatible cable is required for an HDMI 1 080p signal.
• It is possible to connect with DVI devices via a HDMI/DVI conversion adapter, but some equipment may not project the
image properly or other problems could be encountered. “Serial terminal” on page 46
Video player
DVD player
To COMPONENT
video output
To VIDEO output
To S-VIDEO output
RGB signal cable
(Commercial item)
HDMI cable
(RP-CDHG100: Optional))
To HDMI output
DVD player Computer
http://www.pureglare.com.au