POSITION menu

Remote control

Control panel

See “Navigating through the MENU” on page 27. See “Main menu and sub-menu” on page 28.

H-POSITION

You can move the projected image horizontally for fine adjustment.

CLOCK PHASE

If you require further adjustment for the same reason as the DOT CLOCK adjustment, you can fine adjust the timing of the clock. Press I H to adjust. (Available with signals from COMPUTER IN/COMPONENT IN only)

NOTE:

If the projecting signal’s dot clock frequency is higher than 150 MHz, the adjustment may not make a difference.

Available signals from COMPONENT IN:

1 125 (1 080)/60i, 1 125 (1 080)/50i, 1 125 (1 080)/60p, 1 125 (1 080)/50p, 1 125 (1 080)/24p, 750 (720)/60p, 750 (720)/50p

Settings

Move left

Move

right

 

V-POSITION

You can move the projected image vertically for fine adjustment.

Move

Move up

down

 

DOT CLOCK

If you have interference patterns of the projected image, which is sometimes referred to as moire or noise, you can minimize it by pressing I H to adjust the clock frequency. (Available with signals from COMPUTER IN only)

NOTE:

If the projecting signal’s dot clock frequency is higher than 150 MHz, the adjustment may not make a difference.

DOT CLOCK needs to be adjusted before adjusting the

CLOCK PHASE.

ASPECT

You can switch the aspect ratio manually when needed.

Aspect ratio depend on signals

Press I H to cycle through the aspect ratio options. The cycle pattern depends on the connected signals.

 

4:3 \ 16:9 \ 14:9 \ ZOOM1 \

VIDEO/

ZOOM2 \ JUST

AUTO \ 4:3 \ 16:9 \ JUST \

S-VIDEO

ZOOM

 

 

NTSC signal

 

4:3 \ 16:9 \ V SCROLL

 

4:3 \ 16:9

COMPUTER

VGA or SVGA signals

(RGB)

Not switchable

 

WIDE480/600/720/768/768-2/800/

 

900 signals

 

4:3 \ 16:9

 

16:9 \ H - FIT \ V - FIT \ ZOOM

 

1 125 (1 080)/50i, 1 125 (1 080)/60i,

HDMI

1 125 (1 080)/50p, 1 125 (1 080)/60p,

1 125 (1 080)/24p, 750 (720)/50p and

 

 

750 (720)/60p signals

 

4:3 \ 16:9 \ JUST \ ZOOM

 

525p (480p) and 625p (576p) signals

 

4:3 \ 16:9 \ 14:9 \ JUST \

 

ZOOM1 \ ZOOM2

 

625i (576i), 625p (576p)

 

AUTO \ 4:3 \ 16:9 \ JUST \

COMPONENT

ZOOM

525i (480i), 525p (480p)

(YPBPR)

16:9 \ H - FIT \ V - FIT

 

 

1 125 (1 080)/50i, 1 125 (1 080)/60i,

 

1 125 (1 080)/50p, 1 125 (1 080)/60p,

 

1 125 (1 080)/24p, 750 (720)/50p,

 

750 (720)/60p signals

 

 

34 - ENGLISH

http://www.pureglare.com.au

Page 34
Image 34
Panasonic PT-AX200E manual Position menu, Clock Phase, DOT Clock, Aspect