PICTURE menu
FAVOURITE EDIT
You can edit the named memory settings.
Deleting a memory setting
1.Select FAVOURITE DELETE and press the ENTER button.
2.Select the required memory setting and press the ENTER button.
If you select ALL DELETE, you can delete all of the saved memory settings.
3.Select OK in the confirmation screen and press the ENTER button.
Changing the name of the memory setting
1.Select the required memory setting and press the ENTER button.
2.Use F G I H to specify the location of the required character to enter and press the ENTER button.
You can enter up to 16 characters.
FAVOURITE NAME CHANGE
SIGNAL MODE
The current selected signal will be displayed. This is available with signals from COMPUTER IN/ COMPONENT IN/HDMI IN only.
NOTE:
• See “List of compatible signals” on page 45.
| ALL DELETE |
OK | CANCEL |
3. Repeat step 4 until you finish the text line.
Move the cursor to DEL ALL and press the ENTER button to delete all the entered text line.
Press the DEFAULT button to delete the last entered character or indicated with cursor in the text box.
To insert a character in the entered text line, move the cursor to the text box to select the required place and press G then perform step 4.
4.Select OK and press the ENTER button to set the entered text as a name.
NOTE:
•If you have not saved any settings, FAVOURITE1 - 16 will not be displayed.
Settings
http://www.pureglare.com.au
