Multiquip DCA-150SSKII Voltage Selector Switch- Single Phase 240/120V Position, Table of Contents

Table of Contents

DCA-150SSKII — OUTPUTTERMINAL PANEL OVERVIEW

Voltage Selector Switch- Single Phase 240/120V Position

The following are additional voltages available when the voltage selector switch is in the single phase 240/120V position. (See Figure 34 below.)

Single Phase: 120 Volt

The following connection, with the voltage selector switch locked into the single phase 240/120V position (See Figure 34), will offer SINGLE PHASE power at 120V. After hooking up the hard wires to the lugs as shown in figure 37 below, use the Voltage Regulator Knob to fine tune to 120V. (See Figure 35).

FIGURE 35. Voltage

Regulator Knob located

on the control panel

FIGURE 34. Voltage Selector Switch 240/120V Single Phase	FIGURE 37. Hard Wire Hook-up for Single Phase, 120 volt
Position

Single Phase, 240 Volt

The following connection, with the voltage selector switch locked into the single phase 240/120V position (See Figure 34), will offer SINGLE PHASE power at 240V. After hooking up the hard wires to the lugs as shown in figure 36 below, use the Voltage Regulator Knob to fine tune to 240V. (See Figure 35).

FIGURE 36. Hard Wire Hook-up for Single Phase 240 volt

DCA-150SSKII — PARTS AND OPERATION MANUAL— REV. #1 (05/08/01) — PAGE 39