Panasonic PT-F100NTU manual Capturing an image, Stopping the projection temporary

Remote control operation

Capturing an image

When projecting an image, press FREEZE to capture the projected image and display it on the screen as a still picture. Press again to escape. While the image is frozen, the sound will be stopped.

NOTE:

•Escaping from the freeze mode is available by pressing any button.

Stopping the projection temporary

You can turn off the lamp and stop the	Press the SHUTTER button to return to the projection.
projection temporary for electrical power save.

Resetting to the factory default settings

You can reset most of the customized settings
to the factory defaults by pressing DEFAULT	NOTE:
button of the Remote control. Display the	• Some menu items are not available to reset by pressing
required sub menu or the menu items and	the DEFAULT button. Adjust each menu items
press the button again.	manually.
See “Main menu and Sub-menu” on page 30.	• To reset all the settings to the factory defaults, see
	“INITIALIZE ALL” on page 38.

Projecting an image in INDEX-WINDOW mode

You can project an image in split 2 windows as an INDEX-WINDOW, one is frozen, stored in memory and displayed on the screen’s left side, while the display of subsequent images continues on the right.

To escape from the INDEX-WINDOW, press the MENU or RETURN button.

Projected image Frozen image

Continuing image

Changing the image size

Press F G to switch and cycle through in 3 size.

Frozen image

Continuing image

NOTE:

•If you change the window size, the aspect ratio of the image is changed and becomes vertically elongated.

Basic Operation

	Switching the position		Capturing a new image
	In default, the frozen image is displayed on the left		While in INDEX-WINDOWmode, press ENTER to
	and the subsequent image is displayed on the		capture a new image and the frozen image window
	right. Press I H to switch the position.		will be updated in a while.
Frozen image		Continuing image

Continuing image Frozen image

ENGLISH - 27