OPTION menu
HIGHLAND
If you use the projector at high elevation, the HIGHLAND setting need to be ON to set the fan speed high. Press I H to select the required option.
OFF | The fan speed is low. |
ON | The fan speed is high. |
NOTE:
•At 1 400 m (4 593 ft) above sea level, the setting must be ON.
•The loudness of fan noise depends on the HIGHLAND setting.
DETAILED SETUP
You can perform more detailed setting in various items.
OSD DESIGN
You can change the background color of the menu. Press I H to select the required option.
TYPE1 | Semi transparent black |
|
|
TYPE2 | Solid blue |
|
|
TYPE3 | Semi transparent dark blue |
|
|
Settings
CLOSED CAPTION
If the input signal contains closed captions, you can turn on the feature and switch the channels. Press I H to select the required option.
OFF | Deactive |
CC1
Caption channels
CC2
TT1
Text channels
TT2
TEST PATTERN
You can use the 7 different test patterns to adjust the focus of the image. See “Lens shift and positioning” on page 18.
1.Press ENTER to display the test pattern 1.
2.Press F G to select the required test pattern.
3.Adjust the focus with the Focus lever.
4.Press MENU or RETURN to return to the previous menu, oar press repeatedly to escape the menu mode.
NOTE:
•When the projector and/or the screen is tilted, adjust the focus at the center of the image. The upper and lower edge might be out of focus.
•When the image is distorted in keystone, adjust the KEYSTONE in POSITION menu.
SXGA MODE
You can switch the setting between SXGA and the larger setting, SXGA+. Press I H to select the required option.
XGA MODE
You can switch the setting between XGA and the wider setting, WXGA. Press I H to select the required option.
BLACKBOARD
You can exclude the BLACKBOARD in menu items of PICTURE MODE in PICTURE menu. Press I H to select the required option.
ON | Include the BLACKBOARD in menu |
| items. |
OFF | Exclude the BLACKBOARD in menu |
| items. |
BACK COLOR
You can choose a BLUE or BLACK screen for when the projector is idle. Press I H to select the required option.
VOLUME
You can adjust the volume of the
IDecrease
H Increase
AUDIO BALANCE
You can adjust to hear the sound played equally through both right and left external stereo speakers, or shift the balance so more sound plays through the left or right side.
IMore sound plays through the left side
HMore sound plays through the right side
INITIALIZE ALL
You can reset all of the customized settings to the factory defaults except LAMP RUNTIME and FILTER REMAINING menu settings. Press ENTER to initialize and restart the projector by pressing the POWER button.
