Picture menu | Panasonic PT-F100NTU specification

PICTURE menu

Remote control

Control panel

See “Navigating through the MENU” on page 29. See “Main menu and Sub-menu” on page 30.

COLOR

You can adjust the color saturation of the projected image.

LighterDarker

Settings

PICTURE MODE

Depending on the projection environment, you can use these preset parameter settings to optimize image projection. Press I H to cycle through the options.

	NATURAL	Reproduces the original color
	NATURAL	of the image
		of the image
	STANDARD	Setting for a general image
	DYNAMIC	Bright and sharp setting
		Setting for when projecting on
	BLACKBOARD	a blackboard
	BLACKBOARD	See “BLACKBOARD” on
		See “BLACKBOARD” on
		page 38.

NOTE:

•It may take for a while until the selected mode is stabilised.

CONTRAST

You can adjust the contrast of the projected image. Adjust the BRIGHTNESS in advance if necessary.

LowerHigher

BRIGHTNESS

You can adjust the brightness of the projected image.

DarkerBrighter

TINT

You can adjust the skin tone in the projected image.

More More

reddish greenish

SHARPNESS

You can adjust the sharpness of the projected image.

Less	More
sharp	sharp

COLOR TEMPERATURE

You can adjust the white balance of the projected image.

LOW	More bluish
STANDARD	Balanced white
HIGH	More reddish

DAYLIGHT VIEW

You can keep the projected image bright and vivid even in well-lit rooms where the ambient light sources cannot be controlled, such as when a door opens or when window coverings fail to block out sunlight.

AUTO: Automatic adjustment

ON: Active

OFF: Deactive

NOTE:

•Do not cover the ALS (Ambient Luminance Sensor) of the projector. See “ALS (Ambient Luminance Sensor)” on page 14.

•AUTO is not available when INSTALLATION setting in OPTION menu is set to REAR/DESK or REAR/

CEILING.

ENGLISH - 32

Image 32

Panasonic PT-F100NTU manual Picture menu

Contents

PT-F100U Important Safety Notice Model number PT-F100NTU / PT-F100U Important Safety Notice Declaration of ConformityModel Number PT-F100NTU / PT-F100U Trade Name Panasonic Declaration of Conformity Declaration of Conformity DoC Important Infomation Contents Appendix SettingsMaintenance Precautions with regard to safety Precautions with regard to safety Do not look into the lens while the projector is being usedLamp cover gets very hot, and touching it can cause burns Use only the specified batteries Remove the used batteries from the remote control promptly Do not put your weight on this projectorDo not mix old and new batteries Electric shocks can result if this is not done Accessories Minimum required setting screen Read this first Remote control About Your Projector Projector body About Your ProjectorTop and front view Control panel Output by menu operation About Your Projector Back and bottom viewComputer. Selectable for input Setting up Calculation methods for screen dimensionsScreen size and throw distance Projected image Front leg adjusters and throwing angle Setting upProjection method Mounting in the ceiling and projecting from front Adjusting the Lens shift lever Lens shift and positioningHorizontal shift Vertical shift When the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed Connecting with computers LAN cable RGB signal cableConnections Before connection to the projector Connecting with AV equipment Connecting with Video IN/S-VIDEOConnecting with Component Connections Power indicator Switching the projector on/offPower cord Switching on the projector Switching off the projectorSwitching the projector on/off Switch the Main Power on Press the Power button Selecting the input signal Projecting an imagePositioning the image Focus lever Zoom lever Remote control operation Setting up the image position automaticallyOperating range Facing to the projector Switching the input signal Using the laser pointer Resetting to the factory default settings Projecting an image in INDEX-WINDOW modeCapturing an image Stopping the projection temporary Controlling the volume of the speaker Enlarging the centered areaEnlarging the image Shifting the center point Adjusting with the bar scale items Menu NavigationNavigating through the Menu Displaying the Main menu Main menu and Sub-menu Menu Navigation Network Standby WEB Control Live Mode CUT Status InitializeAudio Balance Picture menu For RGB signals Detailed SetupFor S-VIDEO/VIDEO signals Position menu When the Resizing is set to OFF ResizingFrame Lock Position menu Option menu Input GuideStartup Logo COMPUTER2 Select Power OFF Timer Auto SetupDirect Power on Signal Search Highland Closed CaptionTest Pattern CC2 TT1 Input Password Password ChangeSecurity menu Text Display Network menu, the following items are available Network menuItems in Network menu TEMP, Lamp and ARF Indicators Managing the indicated problemsLamp indicator Temp indicator Replacing the ARF Auto Rolling Filter Care and ReplacementCleaning the projector Care and Replacement When to replace the Lamp unitReplacing the Lamp unit Before replacing the Lamp unit Ceiling mount bracket safeguards Care and Replacement Replacement procedureInstalling the safety cable Removing and replacing the lamp unit Troubleshooting List of compatible signals Technical InformationQuality*2 Dots*1 KHz MHz Serial terminal Technical Information Cable specifications Control commandsComputer connection guidance Projector Lamp switching Switching input SignalsInput signal Remote terminal Specifications OUT AudioComputer Audio Variable Audio Screen size and throw distance for 169 aspect ratio Projection size 16 Throw distance LScreen height SH Screen width SW Minimum distance SW = SD x SH = SD x Unit m LW = 0.0332 x SD LT = 0.066 x SD These Operating Instructions are printed on recycled paper DimensionsTrademark acknowledgements Index ALS Ambient Luminance Sensor ARF Auto Rolling FilterCalculation methods Lever Index Numéro de série Avis important concernant la sécuritéNuméro de modèle PT-F100NTU / PT-F100U Advertencia Avis important concernant la sécuritéAvertissement Déclaration de conformité Précautions de sécurité Avertissement Mises EN Garde Précautions de sécurité Sinon cela peut causer des chocs électriques Utiliser uniquement les piles spécifiéesNe pas mélanger des piles usées et des piles neuves Précautions lors de lutilisation Précautions lors de linstallationPrécautions lors du transport Remplacement de lunité de la lampe Délai de remplacement de lUnité de la lampe«LAMPE DE REMPLACEMENT» est Avant de remplacer le lUnité de la lampe Retirer et remplacer la lampe De lUnité de La lampe Protections du support de montage au plafond Remplacement de lunité de la lampeInstallation du câble de sécurité Professional/Industrial Video Panasonic Projector Systems CompanyTechnical Support