Switching the projector on/off
Power cord
Connecting | Disconnecting |
1.Make sure the shape of the power plug and the AC IN terminal on the back of the projector match, then push the plug all the way in.
1.Unplug the power cord from the wall outlet.
2.Depress the latch and slide the cover off.
Basic Operation
2.Align the side of the power cord secure lock with the side guide rail of the AC IN terminal of the projector and slide it in.
Rail guide
3.Place the latch to the latch catcher and press until it clicks.
Latch 
4.Connect the power cord to a wall outlet.
5.The POWER and POWER LOCK indicators light in red and the projector stays in standby mode.
Latch
3.Slide the power cord secure lock up along the side guide rail and remove.
Rail guide
4.Hold the plug and unplug the power cord from the AC IN terminal on the back of the projector.
POWER indicator lights in orange if the internal cooling fan is still operating by internal power supply.
Direct power off function
You can switch off the electric power supply any time by unplugging the power plug from the wall outlet or by switching off the main power. The internal lamp cooling fan keeps operating by the internal power supply, and stops automatically when cooled enough.
Direct power on function
If the DIRECT POWER ON in OPTION menu is set to ON, connect the power cord to a wall outlet and the projection will start even when the control panel is disabled or the POWER button is locked. See “DIRECT POWER ON” on page 35.
If the DIRECT POWER ON is set to OFF, the projector will be at the same mode as last unplugged, standby mode or projection mode.
NOTE:
•Do not use other than a provided power cord.
•Ensure all the input devices are connected and turned off before connecting the power cord.
•Do not force the connector as this may damage the projector and/or the power cord.
•Dirt or dust
•Switch off the power to the projector when not in use.
•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.
•Do not put the projector into the carrying bag with the POWER indicator lit.
ENGLISH - 18
