SECURITY menu
Remote control | Control panel |
MENU | RETURN |
See “Navigating through the MENU” on page 27. See “Main menu and
PASSWORD CHANGE
You can change the password operation to your original.
1.Press a series of button operation up to 8 as a password by using F G I and H buttons.
2.Press the ENTER button.
3.Press the exact same series of button operation you entered in the NEW password box for confirmation.
If a series of button operation is incorrect, you will be asked to perform again.
Entering the SECURITY menu
Every time when you apply to the SECURITY menu, you will be asked to perform the password operation.
PICTURE | INPUT PASSWORD | OFF | |
POSITION | |||
PASSWORD CHANGE |
| ||
LANGUAGE |
| ||
TEXT DISPLAY | OFF | ||
OPTION | |||
TEXT CHANGE |
| ||
SECURITY |
| ||
|
| ||
WIRELESS |
|
| |
| PASSWORD |
| |
RETURN |
|
| |
ENTER |
|
|
When you apply to the SECURITY menu before you change the password to your original, perform to input the following factory default password operation.
Press F H G I F H G I and the ENTER button.
After you change the password
When you apply to the SECURITY menu after you change the password to your original in the PASSWORD CHANGE menu, input the original password operation.
NOTE:
•The factory default password is valid until you change the password in PASSWORD CHANGE menu.
•The entered password operations will appear as asterisks in the box.
INPUT PASSWORD
You can activate the security system and the password operation will be asked to perform when projecting mode started. Unless you perform the correct password operation, all of the button controls will be disabled except the POWER button.
OFF | Deactive |
ON | Active |
NOTE:
•When you activated the security system, make sure to change the password to your original for safety.
•The security system is deactivated by default and when initialized.
4. Press the ENTER button.
NOTE:
•The entered password operations will appear as asterisks in the box.
•Change your password regularly.
•Do not use too simple password to guess.
TEXT DISPLAY
You can set your original text, such as company name or URL information, to display regularly at the bottom of the projected image while projecting.
OFF | Deactive |
ON | Active |
TEXT CHANGE
You can enter your original text up to 22 characters for
TEXT DISPLAY.
TEXT CHANGE
|
| ALL DELETE |
| SPACE | Settings |
|
| |
OK | CANCEL |
|
1.Use F G I H to specify the location of the required character and press the ENTER button.
The selected character will be displayed in the TEXT CHANGE box.
2.Repeat step 1 until finish your original text.
To delete all the entered characters, move the cursor to ALL DELETE and press the ENTER button.
To insert a character in the entered text line, move the cursor to the text box to select the required place, and press G and return to the character field.
To delete a character, press the DEFAULT button or move the cursor to the required character then press the DEFAULT button.
3.Select OK and press the ENTER button to set the entered text.
Select CANCEL or press the MENU/RETURN button to return to the previous menu without setting.
ENGLISH - 37
