Panasonic PT-LB78U manual Computer connection guidance, Technical Information Cable specifications

Appendix

Technical Information

Cable specifications

(When connected to a personal computer)

		NC		NC
	Projector	NC		NC	PC (DTE)
		NC		NC
		NC		NC
Control commands
Command	Control contents			Remarks
			In standby mode, all commands other than the PON command are
PON	Power on		ignored.
			The PON command is ignored during lamp ON control.
			If a PON command is received while the cooling fan is operating after the
POF	Power off		lamp has switched off, the lamp is not turned back on again straight away
			in order to protect the lamp.
AVL	Volume		Parameter
			000 - 063 (Adjustment value 0 - 63)
			Parameter:		SVD = S-VIDEO
IIS	Input		VID = VIDEO		RG2 = COMPUTER2
			RG1 = COMPUTER1		NWP = WIRELESS
					(PT-LB80NTU/PT-LB75NTU only)
Q$S	Lamp condition		Call back
			0 = Standby		2 = Lamp on
	query
			1 = Lamp on control active		3 = Lamp off control active
			Turning off the projection and sound temporarily.
OSH	AV mute		Send the command to switch between on and off.
			Do not send the command consecutively.

Computer connection guidance

You can switch the signals which to output from the COMPUTER1 OUT terminal by pressing the computer key command. The key commands are depend on the manufactures. If you select the computer terminals which has no signals while the INPUT GUIDE is set to DETAILED, the computer connection guidance will be displayed.

Manufacturer	Key command	Manufacturer	Key command	Manufacturer	Key command
		TOSHIBA		IBM	+
Panasonic				SONY
	+	SHARP	+
NEC
		HP		Apple
FUJITSU	+	EPSON	+	Other	+
		DELL

NOTE:

•The computer connection guidance will disappear after 5 minutes.

•Please refer the instructions which provided with the computers for more detailed information.

ENGLISH - 46