AUTO RGB IN
ENGLISH-27
Useful functions
26-ENGLISH
Correcting keystone distortion andautomatic positioning (AUTO SET UP)This projector detects its degree of tilt and the input signal. Keystone distortion and the
position of the image can then be corrected automatically in accordance with the input signal.
Turning off the picture and soundmomentarily (SHUTTER)The shutter function can be used to momentarily turn off the picture and
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in shutter mode than it does in
normal projection mode.
ENTER
FREEZE
SHUTTER
INDEX
WINDOW
PROJECTOR
VOLUME D.ZOOM
STD
VIDEO
INPUT
POWER
RGB
MENU
AUTO
SETUP
ENTER
FREEZE
INDEX
WINDOW
PROJECTOR
VOLUME D.ZOOM
STD
VIDEO
INPUT
POWER
RGB
MENU
AUTO
SETUP
SHUTTER
ENTER
INDEX
WINDOW
PROJECTOR
VOLUME D.ZOOM
STD
VIDEO
INPUT
POWER
RGB
MENU
AUTO
SETUP
SHUTTER
FREEZE
Projector control panel
Press the AUTO SETUP button.
(When the projected image has caused keystone distortion)
BAutomatic positioning
will be carried out.
Still picture
Screen
Projected
image
If you press the AUTO SETUP button, the items given in the table below will
be set automatically in addition to keystone distortion being corrected. The
setting details change according to the signal which is being input.
BThe picture being projected will be paused.
BPress the FREEZE button again to cancel the
still picture.
[
NOTE:
BIf the edges of the projected picture are indistinct, or if a dark picture is being
projected, the automatic setup processing may stop automatically before it is
complete. If this happens, project a different picture and then press the AUTO
SETUP button once more, or make the above adjustments manually.
BIf you would like to make further adjustments to the picture, use the menu
commands which are listed on page 30 and subsequent pages.
BSet “AUTO KEYSTN” in the OPTION1 menu to “OFF” to prevent any deterioration
of the picture as a result of keystone correction. (Refer to page 42.)
Press the SHUTTER button.
BThe picture and sound will be turned off.
BPress any button on either the projector or
remote control unit to return to normal operating
mode.
Press the FREEZE button.
NOTE:
B“SHUTTER” on the MAIN MENU is the same
function.
Pausing a picture (FREEZE)Input signal Contents set up automatically
POSITION, DOT CLOCK, CLOCK PHASE
(If the dot clock frequency is 100 MHz or higher, the DOT
CLOCK and CLOCK PHASE will not be set automatically.)
AUTO RGB IN
RGB signals
YPBPRsignals
Page
38
42
42