Switching the projector on/off
POWER and POWER LOCK indicators
The POWER indicator informs you the status of the power and the POWER LOCK indicator shows the status of the RELEASE button.
When the LAMP and/or TEMP indicators are flashing, the POWER and POWER LOCK indicators will not light.
| POWER LOCK |
| |
| indicator |
| |
| POWER |
| |
| indicator |
| |
POWER LOCK indicator status |
| ||
Indicator status | Status |
| |
| No power is supplied. |
| |
No illumination or flashing | The RELEASE button is pressed and the POWER button is unlocked. |
| |
| The power is on. |
| |
Lit | The POWER button is locked. |
| |
Red |
|
| |
Flashing | Pressing the locked POWER button. | Operation | |
POWER indicator status | |||
| |||
Indicator status | Status |
| |
No illumination or flashing | No power is supplied and the internal cooling fan is not operating. | Basic | |
Lit | The power is supplied and in standby mode*1, and the POWER button is locked. | ||
Red | Network connection standby: Only when NETWORK STANDBY in NETWORK | ||
Flashing | menu is ON. |
| |
|
| ||
Flashing | The power is on and preparing for projection. |
| |
Green |
|
| |
Lit | Projecting. |
| |
Lit | No power supply and the internal fan is cooling the lamp by internal power supply. |
| |
Orange | The power is switched on again while cooling the lamp and recovering to the |
| |
Flashing |
| ||
projection mode. Recovery may take a while. |
| ||
|
| ||
*1. The electric consumption in standby mode is 4.0 W.
