Panasonic PT-ST10EA 1 , 2

12

Using WebBrowser (cont.)

Projector control window

You can make various projector settings.

If you migrate from other page, click [Projector control] in the main menu (at the left of the window).

Basic control window



On this window, click the [Basic control] tab.

Advanced control window



On this window, click the [Advanced control] tab.

Connection with the projector may not be possible immediately after the power is turned on. In this case wait a bit and then

make the connection again.

Detailed set up window

Network config



You can make detailed wired LAN settings.

1 Click [Detailed set up] → [Network config] in the

menu.

Confirm the notes that appear on the screen and

2 click [Next].

The settings window appears, showing the current settings.

To change the LAN settings, click [Change].

• To return to the previous window, click [Back].

•

Contents

Main Contents Request Regarding Security What you can do Check your computer Necessary environment for computers to be connected Connecting with Wired LAN 1 Make the network setting according to your system administrator. 2 Network setting of the projector Displaying the NETWORK menu 1 Select [NETWORK] with the [] buttons. 2 1 2 3 NAME CHANGE You can change the projector name on the network. 1 LANGUAGE PROJECTOR SETUP SECURITY NETWORK POSITION DISPLAY OPTION PICTURE 2 1 LANGUAGE PROJECTOR SETUP SECURITY NETWORK POSITION DISPLAY OPTION PICTURE Select [ON] or [OFF] with the [] buttons. 1 2 button. Using WebBrowser 1 2 4 1 2 1 Click the [Security] tab and set the security level to [Default Level], or select [Custom 2 Accessing from the WebBrowser Start up the WebBrowser, and enter the IP address set to the projector. 1 Enter the User name and the Password. 2 Click [OK]. 3 Monitor information window Projector status Network status If [FAILED] appears 1 2 3 Click [Submit]. 4 Adjust clock E-mail set up ENABLE : Enable or disable email transmission. MAIL FROM : Enter the senders email address. MINIMUM TIME : Enter the interval for sending email. E-MAIL ADDRESS : Enter the email addresses of the recipients. Page Authentication set up Command port set up Change password window Password settings and symbols. Password (forced change) that logged in with administrator/user Switching Languages Using PJLink protocol Querying the projector status Applicable commands PJLink security authentication Glossary Trademarks