Panasonic PT-ST10EA E-mail set up, Ping test

14

Using WebBrowser (cont.)

E-mail set up



You can specify two email recipients.

Click [Detailed set up] → [E-mail set up] in the menu.

[MAIL SERVER]

• ENABLE : Enable or disable email transmission.

SMTP SERVER NAME : Enter the SMTP server name.

[MAIL OPTION]

• MAIL FROM : Enter the sender’s email address.

MEMO : Enter a description of the sender.

[TEMPERATURE WARNING SET UP]

• MINIMUM TIME : Enter the interval for sending email.

INPUT AIR TEMPERATURE :

Select the temperature of the intake sensor

at which to send a warning message.

[E-MAIL ADDRESS]

• E-MAIL ADDRESS : Enter the email addresses of the recipients.

MAIL CONTENTS : Change the type of message as desired.

When sending messages to mobile phones, select “SIMPLE”.

ERROR : Select ON to send email when errors occur.

LAMP RUNTIME : Select ON to send email when “at REMAIN” is reached.

INPUT AIR TEMPERATURE :

Select ON to send email when the temperature set in [TEMPERATURE WARNING SET UP] is

exceeded.

PERIODIC REPORT : Send a message with the projector status at the selected date and time.

When [submit] is clicked, the settings are applied.

Consult your system administrator on MAIL SERVER and E-MAIL ADDRESS settings.

Ping test



You can confirm if a network connection is established with Mail server,

POP server, DNS server or the like.

Click [Detailed set up] → [Ping test] in the menu.

Input IP address : Enter the IP address of the server you want to

test, and then click [Submit].

If succeeded in connection, the following display appears.

If failed in connection, the following display appears.

Contents

Main Contents Request Regarding Security What you can do Check your computer Necessary environment for computers to be connected Connecting with Wired LAN 1 Make the network setting according to your system administrator. 2 Network setting of the projector Displaying the NETWORK menu 1 Select [NETWORK] with the [] buttons. 2 1 2 3 NAME CHANGE You can change the projector name on the network. 1 LANGUAGE PROJECTOR SETUP SECURITY NETWORK POSITION DISPLAY OPTION PICTURE 2 1 LANGUAGE PROJECTOR SETUP SECURITY NETWORK POSITION DISPLAY OPTION PICTURE Select [ON] or [OFF] with the [] buttons. 1 2 button. Using WebBrowser 1 2 4 1 2 1 Click the [Security] tab and set the security level to [Default Level], or select [Custom 2 Accessing from the WebBrowser Start up the WebBrowser, and enter the IP address set to the projector. 1 Enter the User name and the Password. 2 Click [OK]. 3 Monitor information window Projector status Network status If [FAILED] appears 1 2 3 Click [Submit]. 4 Adjust clock E-mail set up ENABLE : Enable or disable email transmission. MAIL FROM : Enter the senders email address. MINIMUM TIME : Enter the interval for sending email. E-MAIL ADDRESS : Enter the email addresses of the recipients. Page Authentication set up Command port set up Change password window Password settings and symbols. Password (forced change) that logged in with administrator/user Switching Languages Using PJLink protocol Querying the projector status Applicable commands PJLink security authentication Glossary Trademarks