8
Network setting of the projector (cont.)

STATUS

Your current settings appear.

Select [STATUS] in the NETWORK menu and press the [ENTER] button.

LANGUAGE
PROJECTOR SETUP
SECURITY
NETWORK
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
STATUS
INITIALIZE
NETWORK CONTROL ON
PICTURE
FUNCTION
ENTER
SELECT RETURN
The status of the following will appear.
NETWORK
DHCP “ON” - “OFF”
IP ADDRESS (See page 6)
SUBNETMASK (See page 6)
DEFAULT GATEWAY (See page 6)
MAC ADDRESS —
MAC ADDRESS : “Glossary” (See page 18)

INITIALIZE

You can reset the network settings to the factory default settings of the projector.

Select [INITIALIZE] in the NETWORK menu and press the [ENTER] button.

1
LANGUAGE
PROJECTOR SETUP
SECURITY
NETWORK
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
STATUS
INITIALIZE
NETWORK CONTROL ON
PICTURE
ENTER
SELECT RETURN
The entry of the password is prompted if [PASSWORD] is turned [ON] in the “ SECURITY” menu.
2 Select [OK] with the [◄►] buttons and press the [ENTER]

button.

INITIALIZE
RETURN
ENTER
SELECT
INITIALIZE
OK CANCEL