Panasonic PT-ST10EA 1 , 2 , 3

5

Network setting of the projector

When making a connection between a computer and a projector with settings other than the default settings, perform the

procedure below to display the menu required when changing the initial settings.

Displaying the NETWORK menu

Press the [MENU] button on the projector.

1 The main menu appears.

FUNCTION

ENTER

SELECT RETURN

LANGUAGE

PROJECTOR SETUP

SECURITY

NETWORK

POSITION

DISPLAY OPTION

PICTURE PICTURE MODE

CONTRAST

BRIGHTNESS

COLOR

TINT

DYNAMIC

SHARPNESS

COLOR TEMPERATURE

DAYLIGHT VIEW

NOISE REDUCTION

TV-SYSTEM

DEFAULT

AUTO

OFF

AUTO

Select [NETWORK] with the [▲▼] buttons.

2 The network menu appears.

LANGUAGE

PROJECTOR SETUP

SECURITY

NETWORK

POSITION

DISPLAY OPTION

WIRED LAN

NAME CHANGE

STATUS

INITIALIZE

NETWORK CONTROL ON

PICTURE

FUNCTION

ENTER

SELECT RETURN

Press the [ENTER] button

3 You can select the sub-menu item.

Depending on the signals which are input to the projector, it may not be possible to adjust some of the items and use some of

the functions. In the case of an item that cannot be adjusted or a function that cannot be used, the corresponding on-screen item

will not be displayed, and you will not be able to execute it even when you press the [ENTER] button.

Contents

Main Contents Request Regarding Security What you can do Check your computer Necessary environment for computers to be connected Connecting with Wired LAN 1 Make the network setting according to your system administrator. 2 Network setting of the projector Displaying the NETWORK menu 1 Select [NETWORK] with the [] buttons. 2 1 2 3 NAME CHANGE You can change the projector name on the network. 1 LANGUAGE PROJECTOR SETUP SECURITY NETWORK POSITION DISPLAY OPTION PICTURE 2 1 LANGUAGE PROJECTOR SETUP SECURITY NETWORK POSITION DISPLAY OPTION PICTURE Select [ON] or [OFF] with the [] buttons. 1 2 button. Using WebBrowser 1 2 4 1 2 1 Click the [Security] tab and set the security level to [Default Level], or select [Custom 2 Accessing from the WebBrowser Start up the WebBrowser, and enter the IP address set to the projector. 1 Enter the User name and the Password. 2 Click [OK]. 3 Monitor information window Projector status Network status If [FAILED] appears 1 2 3 Click [Submit]. 4 Adjust clock E-mail set up ENABLE : Enable or disable email transmission. MAIL FROM : Enter the senders email address. MINIMUM TIME : Enter the interval for sending email. E-MAIL ADDRESS : Enter the email addresses of the recipients. Page Authentication set up Command port set up Change password window Password settings and symbols. Password (forced change) that logged in with administrator/user Switching Languages Using PJLink protocol Querying the projector status Applicable commands PJLink security authentication Glossary Trademarks