Panasonic PT-ST10EA 1 , 2

4

Check your computer

Necessary environment for computers to be connected

First, check your computer to see whether or not it has a wired LAN

• function.

LAN : “Glossary” (See page 18)

Before connecting the computer to the projector, be sure to check the following settings.

•

Check 1 For LAN cable

Is the cable properly connected?

• Use LAN cable that is compatible with category 5 or above.

•

Check 2 Wired LAN settings

<Computer with a built-in wired LAN function>

Is your wired LAN switched on?

•

<Computer without a built-in wired LAN function>

Is your wired LAN adapter properly recognized?

• Is your wired LAN adapter switched on?

• Install the wired LAN adapter driver beforehand.

• For details on how to install the driver, refer to the instructions accompanying the wired LAN adapter.

Check 3 For WebBrowser

WebBrowser is necessary to use WEB control.

• Compatible WebBrowser : Internet Explorer 6.0/7.0/8.0

•

Do not touch the LAN terminal or the metal part of the LAN cable, the static electricity may discharge from our hand (body)

causing a malfunction.

Connecting with Wired LAN

Connection can be made with wired LAN. However, confirm to your system administrator on network settings before changing

any settings.

Turn on the computer.

1

Make the network setting according to your system administrator.

2 If the projector settings are the default settings (See page 6), the computer can be used with the following network

settings.

IP ADDRESS 192.168.10.101

SUBNETMASK 255.255.255.0

DEFAULT GATEWAY 192.168.10.1

Contents

Main Contents Request Regarding Security What you can do Check your computer Necessary environment for computers to be connected Connecting with Wired LAN 1 Make the network setting according to your system administrator. 2 Network setting of the projector Displaying the NETWORK menu 1 Select [NETWORK] with the [] buttons. 2 1 2 3 NAME CHANGE You can change the projector name on the network. 1 LANGUAGE PROJECTOR SETUP SECURITY NETWORK POSITION DISPLAY OPTION PICTURE 2 1 LANGUAGE PROJECTOR SETUP SECURITY NETWORK POSITION DISPLAY OPTION PICTURE Select [ON] or [OFF] with the [] buttons. 1 2 button. Using WebBrowser 1 2 4 1 2 1 Click the [Security] tab and set the security level to [Default Level], or select [Custom 2 Accessing from the WebBrowser Start up the WebBrowser, and enter the IP address set to the projector. 1 Enter the User name and the Password. 2 Click [OK]. 3 Monitor information window Projector status Network status If [FAILED] appears 1 2 3 Click [Submit]. 4 Adjust clock E-mail set up ENABLE : Enable or disable email transmission. MAIL FROM : Enter the senders email address. MINIMUM TIME : Enter the interval for sending email. E-MAIL ADDRESS : Enter the email addresses of the recipients. Page Authentication set up Command port set up Change password window Password settings and symbols. Password (forced change) that logged in with administrator/user Switching Languages Using PJLink protocol Querying the projector status Applicable commands PJLink security authentication Glossary Trademarks