Contents
Main
Contents
Request Regarding Security
What you can do
Check your computer
Necessary environment for computers to be connected
Connecting with Wired LAN
1
Make the network setting according to your system administrator.
2
Network setting of the projector
Displaying the NETWORK menu
1
Select [NETWORK] with the [] buttons.
2
1
2
3
NAME CHANGE
You can change the projector name on the network.
1
LANGUAGE PROJECTOR SETUP SECURITY NETWORK
POSITION DISPLAY OPTION
PICTURE
2
1
LANGUAGE PROJECTOR SETUP SECURITY NETWORK
POSITION DISPLAY OPTION
PICTURE
Select [ON] or [OFF] with the [] buttons.
1
2
button.
Using WebBrowser
1
2
4
1
2
1
Click the [Security] tab and set the security level to [Default Level], or select [Custom
2
Accessing from the WebBrowser
Start up the WebBrowser, and enter the IP address set to the projector.
1
Enter the User name and the Password.
2
Click [OK].
3
Monitor information window
Projector status
Network status
If [FAILED] appears
1
2
3
Click [Submit].
4
Adjust clock
E-mail set up
ENABLE : Enable or disable email transmission.
MAIL FROM : Enter the senders email address.
MINIMUM TIME : Enter the interval for sending email.
E-MAIL ADDRESS : Enter the email addresses of the recipients.
Page
Authentication set up
Command port set up
Change password window
Password settings
and symbols.
Password (forced change) that logged in with administrator/user
Switching Languages
Using PJLink protocol
Querying the projector status
Applicable commands
PJLink security authentication
Glossary
Trademarks
