Panasonic PV-D4734S manual Rear View of Deck, To enjoy Progressive Scan video

Location of Controls (continued)

Rear View of DECK	Bold:	VCR Function				Italic: DVD Function
	Bold Italic: VCR and DVD Functions
AC Power Plug				VHF/UHF Antenna Output Terminal
• While plugged into an AC outlet,				p.12
this DECK consumes 0.85 W of			VHF/UHF Antenna Input Terminal
electrical power in off mode.
			p. 12
Component Video Output		Video Output			Video Input
Connector (Y, PB, PR)		Connector			Connector
(DVD Only)		p. 12			p. 35
p. 13

• • •

Optical Digital Audio	Audio Output 1
Output Connector	Connector (L/R)
	p. 12
(DVD Only)
p. 15
S-Video Out Connector	Audio Output 2	Audio Input
(DVD Only)	Connector (L/R)	Connector (L/R)
pp. 10, 13	p. 13	p. 35

The following table shows the status of the output jacks when in VCR or DVD mode.

		Video Output	Component		S-VIDEO OUT
		Audio Out 1
			Video Output
		Audio Out 2
VCR		YES	N/A		N/A
DVD		YES		YES
Note •	PROG functions on the remote are not available when using Component Video Output and
	S-VIDEO OUT. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG.

To enjoy PROGRESSIVE SCAN video

(1). Connect Component Video Output to the component video input terminals of a television. (See p. 13.)

(2). When PROGRESSIVE OUT is set to “ON” in the DVD Main Menu (p. 55), a Progressive

Scan signal is output from the Component Video Output Connector.

Notes

•The screen may shift off-center when using progressive output. Please adjust the screen position if this occurs. (Refer to your TV manual.)

•If the television is not progressive compatible, a progressive scan picture is not available. Connect the Video Output or S-Video Output connector (see p. 12, 13) and

set PROGRESSIVE OUT to “OFF” in the DVD Main Menu. (See p. 55.)

10 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo