Panasonic PV-D4734S manual Audio Mode for Recording, Audio Mode for Playback, VCR Operation

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

Audio Mode for Recording

1 Press AUDIO (SAP/Hi-Fi)

to display audio mode.

(Display disappears after 5 seconds.)

2		Press AUDIO (SAP/Hi-Fi) repeatedly
	STEREO	to select desired mode.
	SAP

MONO

•Refer to “Receivable Broadcast Types” on p. 26.

•Arrow indicates selection.

3 Make a recording. See p. 21.

Audio Mode for Playback

1 Start playback. See p. 20.

2 Press AUDIO (SAP/Hi-Fi)

to display audio mode.

3		Press AUDIO (SAP/Hi-Fi) repeatedly
	H I F I : L	to select desired mode.
	H I F I : L/R
	H I F I : R	• Select “HIFI (L/R)” or “HIFI (L)” or “HIFI (R)” to listen to stereo
	NORMAL
		recordings in stereo sound.
		Select “NORMAL” for monaural sound.
•	Arrow indicates	• Display disappears after 5 seconds.
	selection.

VCR Operation

Notes

•Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo tapes will playback in monaural sound.

•To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to a stereo TV or an external stereo amplifier and speakers. (See pp. 12, 14.)

•If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.

•Hi-Fi and normal audio playback volume level may differ.

27