Panasonic PV-D4734S manual Weak Signal Display Feature, Auto Shut-Off Feature

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

Weak Signal Display Feature

When “ON,” picture is displayed regardless of signal strength.

	Press ACTION
1 to display MENU.
2				MENU	Press
		SET UP VCR			to select “SET UP
		SET UP CHANNEL
		SET UP CLOCK
		IDIOMA/LANGUE : ENGLISH			CHANNEL,” and
		VCR’S OUTPUT CH:3
		SELECT :		SET : SET	press SET.
		EXIT	: ACTION
3			SET UP CHANNEL		Press
		ANTENNA		: CABLE	to select “WEAK SIGNAL
		WEAK S I GNAL D I SPLAY:OFF
		AUTO SET
					DISPLAY,” and
		SELECT :		SET: SET	press SET
					to set “ON” or “OFF.”
		EXIT	: ACT I ON

•ON: Picture is displayed regardless of signal condition, and may not always be clearly visible.

OFF: Screen turns solid blue when signal is weak or non-existent.

•Selecting ON has no effect on connected equipment with blue back feature.

4 Press ACTION

to return to normal screen.

Auto Shut-Off Feature

The power shuts off at a preset time.

	Press ACTION
1 to display MENU.
2			MENU			Press
		SET UP VCR				to select “SET UP VCR,” and
		SET UP CHANNEL
		SET UP CLOCK				press SET.
		VCR’S OUTPUT CH:3
		IDIOMA/LANGUE : ENGLISH
		SELECT :		SET : SET
		EXIT	: ACTION
3			SET UP VCR			Press
		REPEAT PLAY			: OFF	to select “AUTO SHUT-OFF.”
		AUTO SHUT-OFF			: OFF
		REMOTE WARN I NG			: ON	Press SET repeatedly to
		FRONT DISPLAY			: ON
		AUTO VCR/TV			: ON	change shut-off time as
		TAPE SELECT			: T-120
		SELECT :		SET : SET		shown below.
		END	: ACT I ON
						2 Hours
						OFF	4 Hours
						6 Hours

4 Press ACTION

to return to normal screen.

Note

•The shut-off countdown will not function during Play or Record.

ACTION SELECT

SET

VCR Operation

33