Initial Setup for Basic Connections (Ready to Play)

Before doing Initial Setup

1 Turn TV on.

2 See connections a RF Coaxial Cable Connection and b AV Cable Connection on page 12.

<RF Coaxial Cable Connection> Set TV to channel 3.

<AV Cable Connection> Set TV to VIDEO.

3 [DECK TV]

• Go to “Initial Setup (Ready to Play).” (See below.)

[Cable Box DECK TV], [DSS DECK TV]

Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel in your time zone.

If you use a DSS Receiver, it must be turned off.

Initial Setup (Ready to Play)

1

2

Press VCR on remote for VCR mode.

Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel and clock set starts.

If screen below does not appear, check DECK - TV connection and, if TV is tuned to channel 3, try switching it to channel 4.

To change VCR’s output channel, please see “VCR’s Output Channel” on page 19.

Plug VCR Power plug into an AC wall outlet.

CH AUTO SET PROCEEDING

CANCEL : STOP

AUTO CLOCK SET

PROCEEDING

CANCEL : STOP

Notes

Function buttons are void during Initial Setup.

To eject a tape during Auto Set, press EJECT on remote or STOP/EJECT twice on DECK.

Then make settings manually. (See p. 18.)

If Auto Clock Set takes more than 30 minutes,

press STOP and perform settings manually. (See p. 18.)

Continued on next page...

16

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 

 

Page 16
Image 16
Panasonic PV-D4734S Before doing Initial Setup, Initial Setup Ready to Play, Turn TV on, Cable Box Deck TV, DSS Deck TV